@M.Y. Sluijter-Borms and @John Vreeland have you tested the eth link cable ( the one between pi and pcb), as i bet thats the issue and not the PCB?
So thats everyone with it working, great work guys and enjoy.
@Nick Crosby erm that didnt answer my question, i am trying to help you out but without more info i cant really do that hopefully you get your problem sorted soon.
@Nick Crosby and you plugged it on like my previous image and you confirmed i2c is turned on in config? What does i2cdetect show?
@Isaac Linder yer thats one for staff to answer sorry.
@Nick Crosby did you get your working now too ??
@Isaac Linder depends which cable you damaged? do an image then i can tell you how easy it will be to fix, but that sound like it wont be a fun fix sorry.
@Isaac Linder ok that means the PI can not see the accelshim and why i2cdetect shows as empty,
go to Menu / preferences / raspberry pi configuration
click the interfaces tabenable i2c interface.c...
@Nick Crosby i didnt think i have ever seen a red light on my shim and its working fine. 😕
@Isaac Linder yer that raspberry pi os 32bit thats fine and will work, did you do as i said and manually create the autostart file in that location and try to run again ??
@Nick Crosby thats linux for you so many flavours you always have to work through errors step by step, and if thats not your thing then best bet is to stick with windows, but put the time in and it...
@Isaac Linder ok try this go to that location,( you may need to turn on show hidden files) and create a blank/empty file called " autostart " and then try to run the command again, see if that work...
Raspad - Making learning tech fun and portable.
Raspad - Making your PI more.
When you install any OS other than raspad OS the touch rotate wont work, as the software you need to make it work is specific to raspad os and has to be manually installed and configured from their...
@Thomas Veach click the insert image button its the one that look like a sunset image to the right of the smilie face.
menu - preferences - main menu editor - tick the box next to " universal access " and then click OK.
That should then work just fine, and yes you may have to restart for it to show up, it is very ...
@John Stogner should be easy enough to design and 3d print.
you dont extract the ZIP file, you put the zip file into Imager and burn it to an sdcard.
1. That makes Alot more sense than the current setup i look forward to testing it. just ddont forget the software to enable the accelshim ;)
2. Awesome good to hear.
Not sure i dont use raspadOS myself as i prefer raspberry pi os.
@Michael Blomquist that or make a config app that can be installed in linux and allow for changing the settings of the power/control board by the user.
Yes there is a windows one but that is impos...