@Mario Marais Because RasPad V1.0 has been discontinued, our testers lacked a mainboard. Could you take some pictures of the mainboard so that the technician can confirm the sockets of the m...
@Mario Marais Because RasPad V1.0 has been discontinued, our testers lacked a mainboard. Could you take some pictures of the mainboard so that the technician can confirm the sockets of the m...
@Michael H Sorry for the late reply due to the weekend off.It may be that the usb-usb connection between the internal Raspberry Pi and raspad3 is unstable. You can check it or connect another Rasp...
@Steve Abdu Do you mean that after booting, the screen will go black after pressing the power button but the fan is still running?This is the state of turning off the backlight, and it also requir...
@Dan If you want to use a Bluetooth headset, you can follow the below steps to achieve.
@CerberusStyle @Michael Blomquist It is temporarily impossible to shut down directly through the Raspberry Pi software.
@Daniel GL Hardware upgrades are basically impossible to achieve. However, raspad os can be used on Raspberry Pi 3b+, and the new screen rotation function can also be implemented, but you ne...
Anybody have any luck locating a storage case for the RasPad? I've searched Amazon and various other websites and really haven't found anything that will work. There are tablet cases that fit the d...
I had an audio problem with my RasPad when I first started using it. Specifically, no audio from a YouTube video in the Chromium browser. I thought maybe a problem with a cable or the soundcard, so...
I am looking forward to seeing you continue to grow.
@Kyle Sherman Many thanks Kyle, will try out tomorrow .... Cheers - Torsten
I've updated the OP to make it easier to create the four files. No more copy-pasta needed, the four files can now be saved as-is.
Not sure i dont use raspadOS myself as i prefer raspberry pi os.
I'm using the latest raspadOS. This line did the trick: #sudo modprobe snd_bcm2835 However there is no volume control icon displayed on the task bar. Any idea how to change output devices withou...
Registered and looking forward to great discussion and information trough community!
@Michael Blomquist that or make a config app that can be installed in linux and allow for changing the settings of the power/control board by the user. Yes there is a windows one but that is impos...
Personally i wouldnt worry wait till they iron out the bugs in the raspad3 or release a raspad4
What OS are you using? have you right clicked on the volume control in the start menu and selected HDMI-2?
Hi, I have no sound at all despite aplay showing headphone and HDMI outputs. Any ideas? Could this be a hardware fault?
Hello, I bought kickstarter's first Raspad. I ask Sounfounder to create a kit to upgrade the original Raspad to a Raspad 3.0; Perhaps the touch screen and some components are the same...
Thank you! This community is a good idea!
@SunFounder_official looking forward to seeing this develop
@CerberusStyle Agreed. Lets hope a simple firmware update can make that change.👍
@Michael Blomquist that was my point, the user should not have to do that, the power board should be intelligent enough to do that its self.
I always press and hold the power button after executing a shutdown in RasPad OS and seeing the No Cable message (possibly indicating that the RPi board has shut down?) After a 2 second hold you wi...
Yes, +1 on the correct FAT32 file format. There are a number of sites offering instructions and links to free formatters. I believe I used the Mini Tool Partition Wizard and perhaps the SD Card For...
I also fitted a Pi 4 Model B 8 Gb card in my RasPad case and found that the daughter board cabling was a little tight and could possibly cause connection problems. I cabled everything and then care...
Let me put in a plug for the Three Layer Folding Touchpad Keyboard that Sunfounder carries. I've been using this with my RasPad since purchase and it's really a time-saver and easily makes for accu...
Awesome company, awesome products!
Great idea to encourage community
Thanks for this forum, it's the perfect place to share with this community !
Thanks and good luck!
Thanks raspad
Does PI work if you plug it into a normal monitor? you havent slipped up and formatted the sd card in FAText, instead of FAT32 ? try putting sdcard directly into pi, rather than using the extensi...
Nice solution. Great work. Thanks.
@SunFounder_official Glad to be aboard.
@RasPad Support second Pi4 purchased, same problem. I have switched all cables around, same 'no cable' report. Frustrating.
@Steve Abdu same here. Thought the Pi 4 was not functioning correctly, bought another Pi 4 but same issue.
@SunFounder_official great idea ... Mandy thanks !
Thanks, RasPad what a great Kickstarter you created here. I never win anything so fingers crossed for one of those 3 amazing prizes
Just got my new raspad set up, except the touch screen only works sometimes. What's possibly going wrong here?
@SunFounder_official right on
Hopefully I can win that 15. 6'' Portable Monitor to further create more projects! Wish me good luck! And thanks for this giveaway RasPad team!
you could yes but you would have to change the HDMI cable to one that is HDMI to mini HDMI
Hi I wonder if I can use my first generation Raspad with the RPi 4B? Regards Mario
I reset all the cables and the SD card was properly installed. The machine does now Boot Up, but it still appears a little quirky when I hit the power button for a short press it doesn't revive the...
Nice! RasPad is working pretty well for me, currently finishing a port of OpenMandriva to it.
Thank you! Enjoying the RasPad3!
Thanks, I am hoping to see what mods others are doing to their raspad. I will be posting a 3D printed charging dock for the raspad soon.
i always use sandisk ultra micro sd cards, i have a few all the way up to 512gb and they always work flawlessly.