imho this is a bad thing when you shudown the Pi the screen and fan should turn off on their own, user should not have to press the button to turn off the fan and screen seperately.

Sound works just fine with any linux os version i have tried a few and just have to make sure sound output is set to HDMI-2 and they work fine.

@SunFounder_official very cool, good luck everyone

To be very honest the raspad3 is very well made i only really have four big issues with it. 1. Make the the propritory software availible in a repo for easy updating and to make it possible to ins...

Looking forward to it! Greetings from Hungary!

@Patrick Steinke  hi Patrick,  I have just installed Twister OS 2.0.2 and it works great, lots of fancy stuff included … I had to add the matchbox keyboard. Cheers - Torsten

Android 11 from konstakang runs great, I installed the mpu 6050 and enabled it in the settings and the screen rotations are nice and crisp. The play store takes a bit to set up but it's not hard. I...

@Benoît PARSY Yes. raspian os can be used directly.

@Abel Paz  If you want to install Android system, you can try this imagekonstakang.com/devices/rpi4/LineageOS17.1The technicians have tested it and can be used. Good luck~😬

@John K Thank you very much for such detailed suggestions.👍I have forwarded your suggestions to the R&D department and made relevant records.😊

Hello So when using bare raspian, no need of setup/install to get the display working?    Ben

@Harold Bower  According to the data provided by the supplier (for reference only): The screen can be opened continuously for four or five years, and the temperature is between -10℃~ 60℃.😊

@William Adams  We have tested plugging in Wacom, the touch function will not be affected.☺️

@David Hardingham  I will feedback your comments to the R&D department, thank you.🙇‍♀️ And it is recommended to use RasPad OS, which is more suitable for touch because we have done t...

@Hiroshi Aoyagi  The fan is not turned off, guessing that you may not have actually turned off.☺️ You need to press and hold the power button for three seconds to shut down, a single press j...

@Kurt Jensen  Sorry for not understanding what you mean. Could you provide a video so that we can solve the problem for you?😊

@Kyle Sherman Thank you very much for your solution.👍 We will test according to it.🧐

@Steve Abdu  Is the SD card inserted properly, and the Raspberry Pi starts normally?The red light is always on and the green light flashes quickly, this is the normal startup process. If the...

After assembly, the system fails to boot up. I get a message that says, "No Cable". Any ideas on what to check here?

Hey @Jay Bee  @Kyle Sherman About #5. You can download and reinstall the accelerometer software. cd ~ git clone https://github.com/sunfounder/python-sh3001 cd python-sh3001 sudo pyth...

Happy with my raspad3 and looking forward to getting more out of it with the help of these forums.

I have added the SSH File system (sshfs) to my Raspad to connect to my archive of Korean Pop music from the last century and play it on the Raspad using 'Audacious'. To compensate for the extreme t...

Looking forward to feedback from assembly query.

One of the best, No I will correct that, THE best Kickstart project I've put money into. Had great service from them since as well.

If like @Jay Bee and I you don't like the sensitivity of the auto-rotate feature, you might like this solution.  I made some desktop files that I put on my task bar (made a new Application Lau...

Like @Jay Bee I also didn't like the sensitivity of the auto-rotate feature, so I made some manual buttons I could press. [UPDATE:  I've moved this post here for more visibility.]

I received the RasPad3 with great pleasure.The packaging is very well designed and protects very well.The manual is succinct but more than enough.The installation of the RaspBerry is done without a...

@Méziane Bourassé Yes, simply remove the internal SD Card adapter and plugin an SD card. Works just fine.

Even better would be a digital stylus. I'd like to plug in a Wacom One, but would like for the touchscreen to not be disabled.

I swapped in the fan from my Canakit Rpi4, powering it from the 3.3V on the GPIO and it's quite quiet, and has been keeping the unit pretty cool.

@Patrick Steinke I couldn't find a Noctua fan of the correct size to replace the one the Raspad comes with (3cm x 3cm IIRC).  I tried a larger heatsink covering both chips (using different thi...

Thanks!

@SunFounder_official Thank you for the invite! I'm hoping to get lots of great advice here! Be positive, test negative!

I'm having the same issue, but I have the fan disconnected. I always turn it off completely by holding the button. It can go down to low (1bar left) from 3 bars after 2 weeks of not being used.

@Christian L I love the shells idea with new covers we could swap in for different use cases.  

Thanks!

Hi After shutting down, the battery is drained and unknowingly empty After shutting down, briefly press the power button to stop the fan. What are you using electricity for? ...

It may be that 2.4Ghz signals interfere with each other.It is recommended that you change the resolution frequency of RasPad3, or change to a 5G band wifi to verify.

Great to see RasPad embracing its loyal community!

I have an issue running the WiFi on the RasPad when I use the RasPad HDMI cable. It works fine if I replace the cable with a non Raspad HDMI. I've tried it on 2 Raspad motherboards (a replacement) ...

@Jay Bee i agree, i believe passive solution (i guess we need a really big one, Pi 400 for example). I use raspad mainly for google meet/zoom sessions with students, so it gets hot quickly. I wish ...

@David Down This answer is pertinent.

Yes, I'd prefer the second prize also.

@Méziane Bourassé , That is what I did to get started when I first assembled mine as I was having trouble getting the thin ribbon cable for the SDCard connected. If you don't plan on ...

If you are using RetroPie and need lots of space, a 128GB or 200GB would be the way to go, depending on how many ROM images you have to load into it. I've experimented with several brands and found...

I have one of these and for just $7, it works quite well. https://www.amazon.com/Bargains-Depot-Upgraded-0-18-inch-Replacement/dp/B00D5GVMK8/  

Trying different cards and OS in the RasPad 3.0 and getting different results. Is there an optimal card as well as size that's been working well for folks? I have a couple of different 32GB and 64G...

Great summary and assessment by @John K  I would like to also highlight again a need for a better quieter fan and agree that I may also mod my case to allow for a bigger fan for more air movem...

Thanks - I enjoy my RasPad!!

@Jay Bee  Hi, To late for me... but it is possible to plug the SDCard directly into the PI4 and all run as usual.. of course, it is not longer possible to switch SDCard without to open the Ra...