Thank you. So it cannot be unplugged from the mains and then seamlessly switch over to its internal battery?

@Dave Grimes You can directly use the mains power supply without using the battery pack. Just remove the battery interface on the mainboard and use the adapter to connect to the mains.

@RasPad Support I didn't think anything was holding up behind the screen but I took the pad apart, moved wires, put it back together, and the spot was gone. My temp hdmi cable must have out of...

I am ultra n00b to all this Pi business, but this Raspad is the best attempt I've found at making it into a tablet. But the battery aspect is my concern, can it be powered by the mains? so that it ...

Hi,I know I am late to the slogan contest, but thought I would share an idea anyway.RasPad - Where you go, Pi goes.

@George Olive  Please check if something is holding up behind and squeezing to the screen?Can you send a video to the technician for confirmation?

Today I noticed there is a 5-10mm wide multicolored spot on the touchscreen. If the spot is touched, it changes size, as if there is wet spot between some layer. Anyone know what it could be? I tri...

Raspad - All in one for max Pi fun!

@CerberusStyle , @John Vreeland, @RasPad Support  I've tested following: PI on ethernet cable to switch: -MDI-MDIX-AUTO -Flowcontrol enable/disable/auto -Speed autonegotiate/fixed 10-100-...

PasPad: A portable pi and its connections for anywhere. And forever, the "pi of things" (PoT) para el "internet de las cosas" (IoT) for anywhere and anytime, forever...    ´\(ʘ◡ʘ)/...

@M.Y. Sluijter-Borms and @John Vreeland have you tested the eth link cable ( the one between pi and pcb), as i bet thats the issue and not the PCB? 

I'm already on the second PCB (received one yesterday. Still no Ethernet.If I insert a cable into PI, everything works. If I use loopthrough and pcb socket, no connection. I was already provided...

@Dan Same problem and neither the modprobe nor clearing cache solutions have worked for me. Will post when get a result...

Hi Makers, In order to bring a more user-friendly experience to our RasPad users and enrich the usage of RasPad. Our RasPad team has worked hard to edit a set of online courses, wh...

The Raspad is the Raspberry Pi to go - anywhere. Mobile Coding Pi with the Raspad - take me with! Raspadians - Making raspberry Pi code with Raspad

Raspad:  Your Hardware.  Your Software.  Conveniently in your hands.

RasPad - pi to go.

Ras it up with Raspad - Have lots of examples of projects as a montage.  

RasPad: Start Learning You could have a nice animated presentation in which the last word changes quickly from "Making" to "Coding" to "Plugging" to "Connecting" to "Playing" to "Learning."  ...

@SunFounder_official Raspad - all-in-one Raspberry Pi for makers

Raspad - you may not be able to "have your cake eat it", but you can have a pie and take it with you.

So thats everyone with it working, great work guys and enjoy.

Why partiularly is a Samsung 512gb fitted inside? This SSD drive is very compact, connects to one of the internal USB 3 ports inside via a short & flexible connector with tiny SSD connector. As...

@Méziane Bourassé I also now plug in a USB inside the case to boot, as I broke the SD card holder 

Yes-- and in my frustration to fix stuff, I broke it when taking off the back panel :(

@Nick Crosby @Isaac Linder  The clone instruction has been modified.

@Isaac Linder @RasPad Support @CerberusStyle I seem finally to have got it to work, thank you all! Fiddling with the GPIO pins was the main fix...  

@Nick Crosby Try using sudo before the git clone if you didn't. Edit: Whoops, the opposite. Try not using it if you did.

It failed on the road, so I am going to have another look at it again in my native habitat--try to eliminate some variables. Need another day to look. I need to know for sure.

Let the Raspad be your canvas. (better pic is adviced)

@RasPad Support i get a permission denied (publickey) error... when trying to clone

@CerberusStyle yes and yes. I think it is a hardware issues/ connection to GPIO pins. Tx anyway for your advice

@RasPad Support ok, will try this. But having to bend/twist GPIO pins-- not a great design of the shim if you have to mess about like this.   As for pictures, I got the exact same i2cde...

@John Vreeland  Please send us a message about your order number or backer number.And attach your shipping address and telephone in order to arrange delivery.Message steps:Click on the avatar...

@Nick Crosby  It may just be that GND and VCC are connected, and the i2c interface is not attached. Please twist the pin headers outward when the Raspberry Pi is powered off, so that when the...

@Nick Crosby My issue was more my ignorance and not seeing some of the directions. Firstly, as mentioned I hadn't even installed the accelshim. Then I put it in upside down (which @CerberusSty...

@Isaac Linder good on you, nothing like tinkering to get stuff done. I am still tinkering...

@CerberusStyle I can now have both the red light on or off, but not detected in either state! I am puzzled...

@Nick Crosby erm that didnt answer my question, i am trying to help you out but without more info i cant really do that hopefully you get your problem sorted soon.

@CerberusStyle sadly, no. The shim is not detected when using i2cdetect command...  

@Nick Crosby and you plugged it on like my previous image and you confirmed i2c is turned on in config? What does i2cdetect show?

@RasPad Support sadly, the device is not detected, either when the red light is shining or not. I tried both accelshims I received from you...

@George Olive  Please send us a message about your order number or backer number.And attach your shipping address and telephone in order to arrange delivery.Message steps:Click on the avatar&...

@herbert van de haterd  Please send us a message about your order number or backer number.And attach your shipping address and telephone in order to arrange delivery.Message steps:Click on th...

@Tadej Korošak  There are no details, just solder a 100k SMD resistor at the position of the picture circle.Need to explain, for the early mainboard of kickstarter.com, even if the res...

Actually, I did get it working (for now). Not sure what I did. I assume a loose connection may still be at play. But works like a charm!

@Isaac Linder yer thats one for staff to answer sorry. @Nick Crosby did you get your working now too ??

@CerberusStyle  - It's the longer of the two L-shaped. It It only looked dented (which is still not great). I peeled the casing back a bit and don't see any hole in the shielding but I get a '...

@Isaac Linder depends which cable you damaged? do an image then i can tell you how easy it will be to fix, but that sound like it wont be a fun fix sorry.

Raspad: PorTableT PI