its very hard to help with this as you havent provide any output of the install command so i cant see if there was any errors, so do 2 commands for me to be better able to help you. run sudo i2cd...

I followed instruction on: https://github.com/sunfounder/raspad3/blob/main/docs/source/install_rotating_screen_service.rst and I still can not ratate screen of raspad: After executing command: ...

Update: The display is now inverted colors without any setting changes and also caves in too on the display, like an old tv screen, basically rounding off the edges. Could this be due to the ribon...

I just got a raspad for christmas and it isn't functioning properly, even though I have checked through the wires several times and made sure they are all connected. The raspad doesn't seem to work...

@RasPad Support Thanks

@Lennie Johansson  We have written down your address.For the safety of your information, we have deleted the posts containing your personal information.

@Lennie Johansson @CerberusStyle   The early RasPad3 mainboard had some flaws, and the network cable might not be connected. Sorry. But this problem has now been resolved. We will reissue th...

Dont forget they are based in china and with timezones and language issues it can take time for them to reply just be patient. @Lennie Johansson 

I tried Raspad distro and standard Rspberry OS. I actually tried a PM to the support first but did not get an an answer but will try again if there were a newly employee that could not handle guar...

Hi Lennie, send your order/backer details and what you failure is in a PM to RasPad Support account and they will be able to help you out. Funny thing is i have just had same failure on my own rasp...

The ethernet connection does not pass through. If I connect directly on the pi 4 it works. Also checked the enclosed patch cable between the pi4 and main board and it works. I sent a guarantee c...

@RasPad Support  thank you so much!

@Angelo Massaro  We will reissue a mainboard and the button board for you.  The reissue will be processed within 7 working days. Once the tracking number is updated, we will notify you...

@RasPad Support  I have unplugged the cable as previously mentioned and replugged but nothing has really changed. Still no green lights on. No, I only get a completely black screen.

Thank you!

Hi @Leonid Lukomskiy , you can make a order at our amazon store: https://www.amazon.de/dp/B08T95BQVD  

Hello, I want to buy RasPad, but I faced with this problem. My country (Bulgaria) is not available in countries list in addresses What should I do? Best regards, Leonid

@Angelo Massaro  In addition, please confirm whether the screen display and touch function are normal.If it cannot be displayed, is there a "no cable" prompt or a completely black screen.

@Angelo Massaro Please unplug the red frame in the picture and connect it again to reactivate the circuit board on the left.Our technicians have tested that the low-voltage adapter cannot be used,...

Hi, thanks for your reply. I have been following your indications, but I am still experiencing the same issue: only the red light is on but no green; while on the raspberry pi 4 I can see all the r...

@Angelo Massaro The green LED on the mainboard on the right indicates that the HDMI signal is off, indicating that the HDMI signal has not been received. Please check the wiring, especially the lo...

Update 1: I have removed the board from Raspad 3 and the Pi 4 per se is working without any issue. Therefore, there should be something wrong with the tablet.

Hi everyone, I am a neophyte in the Raspberry world, which is also a problem when it comes to finding the right tutorials and tips for beginners' issues. Anyways, I will try to explain as well as ...

@Charli Langford  Enter the raspad-auto-rotator directory cd ~/raspad-auto-rotator If not, you can clone it again git clone https://github.com/raspad-tablet/raspad-auto-rotator.git Then e...

In terminal type this sudo nano /boot/config.txt Then add the line: lcd_rotate=2 save and exit ( ctrl+x ) and reboot. If you have a line that say " display_rotate " then delete it as its no lo...

This is probably old to most of you but I'm new here .... I have a raspad with Pi 4B, running Bullseye. As usual, I want the screen inverted so when I use it it stands on the fat bit of the wedge. ...

brief history I was in the 2nd wave of deliveries, got the no cable, support asked me if my hdmi cables were plugged in moved, covid, health issues, unboxed it this afternoon, guess what "no cabl...

I ran into the same problem. The code worked fine with the last version of Raspberry OS, but when I upgraded to "Bullseye" I get the same error as @M L. I posted the issue at PeterCyx's github to s...

@M C ok that makes it easier to help you, i would not want to use the raspad3 in a live event type eviroment it just wont hold up to the task, going down the custom route or getting something like ...

Ive been comparing different touch screens and cases to evaluate if this works out better for me as a prebuilt tablet unit or if i need to go down a total custom diy type route. I will be using th...

@M C what exactly are you trying to achieve ? as then i might be able to better help you with answering all your questions in one thread and not lots of little ones.

Ok as a follow up ive received another email now stating its original spec sheet emailed was wrong and confirms its ips. And another data sheet has been sent on the screen itself, but this documen...

Ok so sunfounder has confused me. I emailed and asked them for display specs eg response time, contrast, brightness specs etc. They sent me an email with specs that just said it was a tft and noth...

@M C  The remaining space does not support the installation of another ssd.

Im guessing diy case it is then.. i'll be using it for development in a mobile setting so i was looking for a portable solution that is all on one. What are the dimensions of it and what sort of "...

@M C 1. Nope there is no case its a developement platform not something to be carried around like a normal tablet, but its a standard 10inch screen so any screen protector for tablet that size wil...

Two things im looking into before purchasing a Raspad3 First are there any protective travel/transport cases available for it and screen protectors? Second is it possible to fit a ssd addon board...

@Troy Heidner When did you buy this product? It may be a problem with the USB cable.Please provide your order number (or backer number) and delivery address. After verification, we will issue you ...

Hmmm... it seems to me that the ports are advertised as being USB 3.0 ports.  And they colored blue which is supposed to be an indicator that they support USB 3.0 speeds (although I've seen ex...

As other drives and devices work, that would lead me to think that its not defective but what could be the case is the usb hub inside the raspad doesnt support high speed usb drives as its design a...

That's a great question, I'm sorry I forgot to include that in the orignal post.  Yes, I have tried plugging these USB sticks into the Pi directly and they work fine.  Also, I tried switc...

can you run this command and post the output now your on a fresh install and follow the setup proceedure above, as im guessing there was no error messages with the install as you havent stated any....

Have you tried plugging the drive directly into the RPI itself is it then recognised?  yes keyboard hub is usb2

ok, i did this, but its still not working ps i'm so sorry for the inconveinenc! 

Hi there, I'm a fairly new RasPad owner, I've had mine for a couple weeks now.  I've discovered a fairly major difficulty with the unit.  It won't recognize certain USB sticks plugged in...

that should be possible, depending on the tranceiver you use.

I've been wanting to build a Tablet out of a Pi 4 for a while now. I'm honestly surprised at how hard it is to find products with this in mind. You guys seem to have almost everything I need. Edit...

@Travis Southard its a OS level function why would it be on the raspi preferences?  at this stage raspi is just an overlay of RPI OS with extra touch functions, and you ahve said your using a ...

@CerberusStyle Thank you! That was exactly the issue! I didn't even realize I *could* right-click that icon. (Would prefer it be in the RasPi preferences really) but that did solve my problem! Th...

Right click on the volume icon on the menu bar and select the correct output.AV = headphone jack on the pi HDMI 1 = External display speakers HDMI 2 = internal speaker But " Raspberry Pi OS Bull...