@elijah keller now we are getting somewere good job now we need to do teh final two commands sudo reboot then when the RPI has restarted follow this. https://raspad.readthedocs.io/en/latest/faq/...

now what?

here is what i got  pi@raspberrypi:~/python-sh3001 $ sudo python3 setup.py installrunning installrunning bdist_eggrunning egg_infocreating sh3001.egg-infowriting sh3001.egg-info/PKG-INFOwriti...

@elijah keller ah ok that were the issue is there have renamed the script try typing this. sudo python3 setup.py install  

so copy these commands and paste them to the terminal?

here is what i get pi@raspberrypi:~/python-sh3001 $ cd python-sh3001bash: cd: python-sh3001: No such file or directorypi@raspberrypi:~/python-sh3001 $ dirDESCRIPTION.rstdocsLICENSEMANIFEST.inReadm...

ok type this and paste the output. clear cd python-sh3001 dir  

here it is pi@raspberrypi:~ $ cd python-sh3001pi@raspberrypi:~/python-sh3001 $ 

here is the whole thing pi@raspberrypi:~ $ sudo auto-rotator calibratesudo: auto-rotator: command not foundpi@raspberrypi:~ $ pi@raspberrypi:~ $ sudo auto-rotator calibratebash: pi@raspberrypi:~: ...

@CerberusStyle let me try running thru it again

ok, you making this abit hard to help as you not posting the whole output, but that error tells me you have missed the step to enter the directory were the files have been downloaded. cd python-sh...

and when i try to run the calibretion script i get this pi@raspberrypi:~ $ sudo auto-rotator calibratesudo: auto-rotator: command not found

can't open file 'install.py': [Errno 2] No such file or directory

@elijah keller whats the error it is giving you ?

i know how to force rotate it but the problom with that is the touch screen doesent work with that

@CerberusStyle yes i have it plugged in and the 12c command detects it but when i try the forth command it givesn me an eror and i am using raspberry pi os

@elijah keller without alot more infomation, there is not much i can do to help you, as each problem here has been a slightly different cause and solution. What OS are you using? have you plugged...

i am having this problom too

@Heinrich Fischer  Sorry for the inconvenience cause.  We will reissue you a new long HDMI cable. Once the replacement is shipped, we will notify you.

So Touchscreen is not working. So the Touchscreen is working, but it is a bad solution. The HDMI Cable with longer plug is too short.  

Touchscreen is not working after delivery. The HDMI Cable with longer Connector is too short. The Connector can not be inserted properly. The Display works, but the Touchscreen not. When I as...

Found out that Volumio is compatible with pi4. Im going to give it a try to see if it runs on the display natively.

Really helpful tips. Thanks for sharing.

Thanks for this. I've been looking for a similar solution. One question though, are you overclocking your rPi? I want to run mine at ~2GHz, but concerned about thermals.  TIA

I have a similar setup, RPi 4 with 8GB RAM. I used a 64 GB SD card, which required some special formatting. The instructions for that can be found with a Google search. Then I followed the instruct...

It was best to recreate an  SD card, after this all is OK !!

Have installed a fresh new SD card with Raspberry pi images, 32 bit on a raspberry pi 4 with 8 Gb. I have followed the oinstaruction to install raspad-launcher I am u nable to find the menubar UP...

@Jay Bee  Please look at this link: https://docs.raspad.com/en/latest/

The links seem to be dead. Cannot access the web pages from Europe.

@David Taylor yer that would make sense, to have to change pass to open security, glad you got it sorted :)

@CerberusStyle Thanks!  Yes, that's what I thought, but it didn't work.  So I got a terminal, changed "pi" password, then it worked.  So either the password wasn't the default to st...

The process to ssh to the raspad is exactly same as if the pi was on its own, you just set the RPI up with an install of raspberry pi os, and turn on SSH then login to the RPI via its internal ip (...

I'm familiar with using SSH and VNC to the Pasperry pi, but when I try this to my newly installed RasPas the usual pi/raspberry don't work.  Both SSH and VNC are enabled.  I think the use...

I usually have something to do with my Raspad at least once a week. To keep an eye on battery SoC, I will invariably connect up the charging circuit and observe the charge status LED before turning...

@RasPad Support i think it has need power to maintain or in sleepmode, too. But i dont think it use much power as that. beside, i have some trouble with wifi, raspad os... but it is stil...

@Duy Khanh It is normal, because the microcontroller on the raspad3 mainboard needs power to maintain it, and it may not have been fully charged before.

@CerberusStyle  thanks for reply! That is exactly what i do, turn off completely. Are there any other reason fo this problem? Thanks

You need to press and hold the power button for three seconds to shut down, a single press just turns off the screen backlight. After doing this make sure that the red light on side of raspad is of...

I'm having the same issue. I turn off the device completely (hold the power button and nothing run include fan) but about 1 week later, when i turn it on, it  run out of battery (1 led blink,...

Thank you.  Much appreciated.  😀🤗

@Steve Dumbrell 15V2A, positive inside and negative outside

@Myriri Myri  It is still testing and waiting for new samples. We have tried wrapping with aluminum foil, but the effect is not very good.We will update you with good news.

My original Raspad power supply got mixed with a box of other power supplies.   Could you please tell me what the voltage and polarity is?  

@RasPad Support Are there any chances we might see updated cables made available to people who bought raspads and have this issue?  Quite frankly at this point I'd even pay for them. Sunk cos...

@Steve Dumbrell next time please start a new thread rather than, posting in an unrelated one but here is the info from the power brick. maker: KEERDA model: 150200F 15V2A  

My original Raspad power supply go mixed with a box of other.   Could you please tell me what the voltage and polarity is?

@Myriri Myri  Our technical department is being plagued by this problem recently, and we will test it on HDMI in the near future.Thank you for the suggestion.

The Raspberry Pi especially the 4 has a history of interference from the HDMI ports affecting the wifi. As a consequence official cables are shielded to prevent this interference. Future raspads w...

@CerberusStyle   Thats nice but my questions have in fact not been answered by this thread.   

@Myriri Myri i have remove your other thread as it was just a duplicate of this one that has already been answered, please dont post the same thing in multiple threads.