@RasPad Support OK. Are there any future plans for an x64 Raspbian that will operate on the RasPad?
@RasPad Support OK. Are there any future plans for an x64 Raspbian that will operate on the RasPad?
Also, when it is connected and left unattended for a time it becomes unresponsive and takes a little while to wake back up again. I don't know how long that time is, and I'm not really sure what it...
Does anyone else have troubles connecting to a Bluetooth keyboard? I have already paired the keyboard with the RasPad, but I have to turn the keyboard off and on three times to get it to connect. I...
no you need the cables for the screen to function.
Thanks for sharing this informative and amazing post here. I found it very interesting and enjoy reading this blog. Will wait for more posts.
thank you CerberusStyle can i assume if i don't need to use the hdmi port in the pi4 and raspad3, i can just remove the hdmi cable and thus removing the interference? want to hear from you first b...
@Patrick Ma Try to connect to the wifi of the 5g band, it may be that there are too many signals in the same band causing interference.
This sadly is due to a flaw in the Pi4 models that cause some to be very sensitive to EMF and as such wifi is affected, this then becomes an problem when the pi is in the raspad as it would seem th...
hello, i have several PIs (version 3 and 4) at home connected to a private subnet. the pi4 in the raspad has very poor reception. i put a pi4 in a regular case right next to the raspad and the pi4...
I found this post very interesting and informative. Thank you for sharing your special thoughts with us. I definitely share this with my peeps.
I first just wrapped the hdmi cables, and it did not work. Once I also wrapped the connectors, it then worked.
I wrapped my hdmi cables with aluminum foil, including the hard connector plastic. Then wrapped it with electrical tape. Mine then worked fine.
Wrap the long HDMI cable with aluminum foil from connector to connector. Then wrap with electrical tape. I actually wrapped both HDMI cables. You must wrap the hard plastic of the connectors also. ...
@Michael Blomquist Our technicians have tested, it can't work with RasPad Launcher.
@Evon Jay glad it worked! Now on to trying to quiet the fan noise
@John Windberg Did you not have this little module in the product box you received?
@Brian Piper I ran into the same problem. The code worked fine with the last version of Raspberry OS, but when I upgraded to "Bullseye" I get the same error as @M L. I posted the issue at PeterCyx'...
Wondering now that we have a 64 bit Raspberry Pi OS out of beta, will it work with RasPad Launcher? Also, can't something be done about the spam filth that has attacked our user forum?
@John Windberg The only way I could get it to work was to install a mpu6050 accelerometer. They are cheap on amazon. I used double sided tape and wired it in with some female jumper wires. I...
I've installed the latest lineage os, and it seems cool, but sensor test apps tell me there is no accelerometer and thus auto rotate won't work. Yet, people says it does. What?
@A R is the berry screen upside down or just the login page?
@CerberusStyle But when I remove it, the behavior is exactly the same (upside down boot & login, once logged in everything is normal)...?
@A R ohh i see what your doing lol, the Raspad3 is already up the right way from the start you dont even need to rotate the screen, remove the line. lcd_rotate=2 you dont even need it with Raspa...
@CerberusStyle Tried your supplied config.txt and nothing seems different. Boot Screen- Login- Once logged in, auto-rotator makes things normal- Tha...
@A R ok try this config, you had some error icluding a typo and you can not set hdmi_enable_4kp60=1 as the screen doesnt support that. # For more options and information see # http://rpf.io/co...
Thanks again for your help. System is up to date using apt. cmdline.txt console=serial0,115200 console=tty1 root=PARTUUID=58a563e4-02 rootfstype=ext4 elevator=deadline fsck.repai...
Hmm that very odd, you deffinately have something odd going on as i know it works as im currently looking at it working with RPI OS 64bit. Would need to see you config.txt and cmdline.txt files to ...
@CerberusStyle Thanks for the reply and sorry it was unclear but I tried both the lcd_rotate and display_rotate commands seperately, not at the same time. I'm currently using the 64 bit ve...
@A R i can see your mistake right away :) lets get you sorted. You have messed yourself up by using an outdated commands and the correct commands at same time, so basicly undoing your work. in yo...
@CerberusStyle Good information than I can feel hopeful for a good solution when my replacement arrives.
@A R If you want to keep the same orientation all the time, just turn off the automatic rotation of the screen. sudo rm /etc/xdg/autostart/raspad-auto-rotator.desktop
I mainly use my raspad standing up on my desk, instead of laying flat. Auto-rotate is set up and works great once I log in, however, prior to login everything is upside down. I'm running KDE with t...
@RasPad Support replacement board has arrived and is working perfectly thanks.
@Philip Graff It is the air bubble generated by the protective film. Tear off the protective film and they will disappear.
@Philip Graff yes that looks like the film is still on its possible the green tab was just missing but i cant be 100% so wait and see what @RasPad Support say before doing anything.
@RasPad Support @CerberusStyle Thanks for your replies. Here is a photo of the screen's edge showing what appear to be the kind of bubbes you would expect with a protective film. Actually t...
@JD Springer You can email to support@raspad.com. Provide the order number and the problem you meet, the staff will contact you to help with that.
@Philip Graff RasPad has a protective film to prevent scratching the screen. It can be torn off.If you are not sure what caused the bubbles on your raspad, you can provide a picture and we will he...
@JD Springer ok your making very little sense, has your problem been resolved as from your reply im not sure as you still havent given any images and you say about a new ribbon cable but then ask w...
By the way, if you know where we could buy replacement parts for this, please let me know in case the new ribbon cable has an issue.
Nevermind, we found out that the ribon cable to the screen underneath the board was probably faulty, and needed a replacement, and the no cable issue was because there was no sd card inside, Thanks...
@Philip Graff with out a picture of the device i am unable to assist you with this as it possible there is a protective film on the screen but could not say if yours definately does as you have not...
I assume the answer is "no" but does the Raspad 3 come with a removable protective film over the screen? The reason I even ask is because there are what appear to be a few small bubbles in the out...
@JD Springer As @CerberusStyle said, we need photos about the screen display. Could you please provide to us?
no problem, happy to see you got it working.
Thank you very much. It is working.
Go to Menu > Preferences > Raspberry Pi Configuration and then go to interfaces tab and enable I2C
BEFORE: pi@raspberrypi:~ $ sudo i2cdetect -y 1Error: Could not open file `/dev/i2c-1' or `/dev/i2c/1': No such file or directory AFTER: pi@raspberrypi:~ $ git clone https://github.com/raspad-tab...
Can you provide pictures of the device both the screen and the inside of the device, then we can start to help you get your issues sorted.